BlackBerry Q5 Take Apart and disassembly instructions
If yours BlackBerry Q5 need for repair or any part replacement, here is the guide for its disassemblying. Note! Only you are responsible for the process and result. Go to service center if you are not sure.
For taking BlackBerry Q5 apart, you will need some tools:
- T5 screwdriver
- Pry tool
BlackBerry Q5 disassembly instructions
This BlackBerry Q5 will be disassembled.
First take off the back (battery) door. Use plastic pry tool and gently do it.
Continue to pry around the back door.
Here is the battery BAT-51585-003 under the back door.
Take the T5 screwdriver in your hands, turn out 6 screws around the middle part.
You should get these screws in your hands.
Pry off side buttons.
Middle part is ready to be removed.
You can also remove top and bottom antennas from the middle part, if needed (top antenna pictured).
You can also remove top and bottom antennas from the middle part, if needed (bottom antenna pictured).
Wow, that's middle part of BlackBerry Q5 removed.
BlackBerry Q5 without middle part.
Switch off the LCD screen connector.
Do it for touchscreen connector next.
BlackBerry Q5's motherboard are ready to be removed.
As a result, you got bezel with LCD+touchscreen and motherboard separated.
Take the keypad off.
Take the LCD+touchscreen off the bezel.
You'll need pry tool to do it.
Next you can separate LCD and touchscreen.
Here are they, all these parts.
Then pry off the battery connector.
And now the most crappy part of BlackBerry Q5 disassembly — you need to separate the battery. It's not easy, be careful! Better if we warm the glue.
After this work done..
To take cameras out, use T5 screwdriver.
Finally! We are done for BlackBerry Q5 disassembly. Good work!